VicoHome DocumentationHow to connect the Solar Panel to your Pan & Tilt Camera?
Step-by-step guide to connect solar panel to Pan & Tilt Camera
If the solar panel fails to charge the Pan & Tilt Camera, please check the connection between the camera and the solar panel.
You can connect the camera to the solar panel by following the instructions below:
- Open the rubber plug on the back of the camera.
- Separate the waterproof silicone port-protector of the solar panel cable.
- Insert the cable of the solar charger to the charging port of the camera.
- Cover the waterproof silicone port-protector of the charging port. The silicon surface of the solar charger is flat with the camera surface.
Note:
- The charging performance of the Solar Panel depends on the local weather. Please make sure the Solar Panel can receive direct sunlight for several hours a day.
- Please make sure the charging connector is fully plugged into the camera. Please note that there will be no gap if they connect properly, and their surface is flat.
- Please make sure the waterproof silicone port-protector and other accessories can protect the connectors on your camera.