Smart Birdhouse

Overview

The LASTOOLS Smart Birdhouse with Camera is a modern birdhouse designed for nature enthusiasts who want to observe and record bird activity in their garden or backyard. It features a high-definition camera, real-time video monitoring, and cloud storage capabilities. The durable, weather-resistant design ensures long-lasting performance, while the easy-to-install setup makes it user-friendly for both beginners and experienced birdwatchers.

Safety Instructions

General Safety Warnings

• Keep all components dry. Avoid water and moisture.
• Mount securely on a stable surface to prevent falls.
• Install out of reach of children and pets to avoid injury or damage.
• Avoid extreme temperatures and prolonged direct sunlight (camera and cables).

Electrical Safety

• Disconnect power before cleaning or adjustments.
• Use only supplied adapters/cables. Do not use damaged components.
• Do not open or repair internal components.

Product Structure

Camera Structure

The detachable camera module installs onto the base inside the birdhouse.

• Front: Infrared light, Lens, White light, Indicator light, Microphone, Human body infrared sensor
• Bottom / back: Threaded bracket interfaces, Speaker, Type-C port, Reboot hole, Power button, Micro-SD card slot

Insert a Micro SD Card

Insert a compatible micro SD card (4–128 GB, not included) into the camera's Micro-SD card slot if you plan to store footage locally. Format the card before first use. For full details, see Insert a Micro SD card.

Installation Guide

Step 1 Mount Birdhouse Secure the birdhouse to a wall or tree using the included screws.

Step 2 Insert micro SD Card (optional) Insert a compatible micro SD card into the camera if you plan to store footage locally.

Step 3 Attach Camera Secure the camera to the base inside the birdhouse.

Step 4 Connect Power Route the solar panel cable through the side cable hole, connecting the camera to the solar panel.

Select a good spot

Install the camera in a location with an unobstructed view and within Wi-Fi network coverage. The camera can be placed on shelves, other surfaces, or wall-mounted.

Charging the Battery and Solar Power

The camera is powered by a built-in battery that is kept topped up by the solar panel. Route the solar panel cable through the side cable hole and connect it to the camera's Type-C port so the panel can charge the battery during daylight. You can also charge the camera directly using the supplied 5V/1.5A adapter via the Type-C port. See Charge the camera battery for more.

Power On / Off and Network Configuration

• Long press the power button for 3 seconds to power the device on or off.
• Double-click the power button to enter network configuration mode after the prompt tone.

Set Up with the VicoHome App

Download the app and register

Step 1 Scan the QR code in the instruction manual, or search for "VicoHome" in the App Store (iOS) or Google Play (Android).

Step 2 Download and install the app on your smartphone.

Step 3 Open the app and register an account, or log in using a third-party service (e.g., Google, Facebook).

Pair the camera

Step 1 Tap Add Camera Now in the app and enter the name and password of your Wi-Fi network.

Step 2 Tap Continue to generate the QR code for pairing the camera.

Step 3 Press and hold the power button for 3 seconds to power on the camera. Position the camera about 20 cm (7 inches) from the QR code on the mobile app. Hold until the camera emits a "Di" sound — the scan was successful and pairing starts.

Step 4 After a short delay, the camera emits a connection success prompt tone. On the app, assign a device name and select its location. Tap Continue to complete the pairing.

For the general pairing flow, see How to add or share a device.

Troubleshooting binding problems

• "Wi-Fi Password Error" — Check whether the Wi-Fi password you entered in the app is correct.
• "Authentication error" — Ensure your Wi-Fi network is not an enterprise-level network, and that the device supports only the network with the security level below WPA-2.
• "Wi-Fi not found" — Check whether you selected the correct Wi-Fi name, place the device near the Wi-Fi router, and ensure the router is powered on. Note that 5 GHz Wi-Fi cannot be detected by the device.
• "Retrieving IP meout" — It shows your router has exceeded its device connection limit. Please remove less frequently used devices from the network, or restart the router to clear unconnected devices. Contact your router administrator if issues persist.
• "Cloud service connection fail" — Check if the router maintains proper external network connectivity. This error commonly indicates either network disconnection, or your router operating as a local area network server. Please confirm internet connectivity is active. Temporarily disable the firewall and reconnect.

Share the Camera

When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device.

Step 1 Find the camera you want to share on the app homepage or camera setting page. Find the button and enter the sharing page.

Step 2 Tap Invite — a QR code will be generated for sharing.

Step 3 For the members you need to share with, find Add Friend's Camera on the User page to enter the scanning page. Scan the QR code on your mobile phone, and you will receive the confirmation notification after successful scanning. Sharing completes after your approval.

Operating the Camera and Cloud Storage

• Access the live feed from your birdhouse via the VicoHome app by selecting your device from the home screen. See Live view.
• Record videos and take snapshots in real time.
• Enable cloud storage to automatically save footage and retrieve it remotely from any location. See Subscriptions & Awareness service.
• Access the app's motion detection settings to receive alerts when birds enter the birdhouse. See Motion detection.

Technical Specifications

Troubleshooting Guide

• Wi-Fi Connection Fails: Ensure your phone is connected to a 2.4 GHz network; reset the camera and retry.
• Camera Not Powering On: Check power cable connections and verify the outlet functions properly.
• No Motion Detection Alerts: Verify motion detection is enabled in the app settings.
• Cloud Storage Not Working: Confirm your subscription is active and check network connectivity.

Warranty and After-Sales Service

This product includes a 1-year limited warranty covering defects in materials and workmanship. For warranty claims or technical support, contact the Customer Service Team at: [email protected]

Related Articles

• How to add or share a device
• Live view
• Charge the camera battery
• Insert a Micro SD card
• Motion detection
• Subscriptions & Awareness service